Laundry Timetable Planner

On laundry day the washer and dryer always seem to clash: one load waits wet in the machine while another hogs the dryer, and the last load finishes hours later than it needed to. This free laundry timetable planner wash dry schedule fixes that by working out your exact wash-then-dry sequence before you touch a single load.

How to use the laundry timetable planner wash dry schedule tool

Step 1 — enter your setup. Set your start time and how many washers and dryers you actually have. Be honest about the dryer count: most clashes come from planning with two dryers when there is only one.

Step 2 — list your loads. Add a row per load with its name, wash minutes and dry minutes. Set dry minutes to 0 for anything you hang dry; those loads skip the dryer queue entirely.

Step 3 — build and follow the timetable. Press Build timetable and work through the wash start–end and dry start–end times in order. Copy or print the plan and stick it on the machine.

Worked example: 3 loads, 1 washer, 1 dryer

Press Load example in the tool to fill this exact setup: three loads, one washer, one dryer, starting at 09:00. The single washer forces the washes into sequence, and the single dryer makes the Colours load queue behind Whites.

The total finish time is 11:30, which is 150 minutes after the 09:00 start. Colours waits 20 minutes because the dryer is still busy with Whites when its wash ends.

Change the dryers to 2 and rebuild: Colours dries 10:10–11:10 with no waiting, and the finish moves to 11:10. That 20-minute difference is the dryer bottleneck made visible.

Common laundry timetable mistakes

Starting every load at once. Throwing all the loads in at 09:00 feels productive, but with one dryer the dry queue explodes. Washing in sequence means each load moves to the dryer the moment one frees up.

Forgetting dryer time. Most people plan only the wash and treat drying as instant. A 60-minute dry cycle is usually the real bottleneck; this laundry timetable planner wash dry schedule plans both stages, so the dry never surprises you.

Leaving wet loads waiting. A finished wash sitting in the machine turns musty fast. The waiting column shows exactly which load waits and for how long, so you can hang dry one load or shift your start time instead.

If you are unsure how many loads to plan for, read our guide to how many loads of laundry you do per week. And if you mix fabrics in one load, check the combined wash temperature for mixed loads before you set the wash minutes.

FAQs about the laundry timetable planner wash dry schedule tool

How does the timetable handle one washer and one dryer?

With one washer, washes run strictly in order: each load’s wash starts only when the washer frees up. With one dryer, each load’s dry starts at the later of its wash end and the moment the dryer frees up, so loads queue in the order their washes finish. The worked example shows exactly this: Colours waits 20 minutes because Whites is still drying.

What if a load is hang-dry?

Set its dry minutes to 0 and the tool marks it “Hang dry” and skips the dryer queue entirely, so it never blocks or waits for a dryer; its finish time is simply its wash end.

Why does a load wait?

A load waits when its wash finishes but every dryer is still busy with an earlier load. The waiting column shows the gap in minutes between wash end and dry start, and a note names each waiting load so you can spot the dryer bottleneck at a glance.

How is the finish time calculated?

The tool tracks when each washer and dryer frees up, schedules every load’s wash and dry in order, then takes the latest end time across all loads — including hang-dry loads, which finish at their wash end. The total elapsed minutes are the finish time minus your start time.

Does the tool save my timetable or need an account?

No. Everything runs in your browser: your loads, times and the timetable never leave your device, nothing is saved, and there is no account or signup. Use Copy result or Print if you want to keep the plan.